New Products – January 2011

POLISHING SYSTEM
NSI Solutions, Mukilteo, Wash., introduces the Phantom SL3 System™ with quick-change 3” abrasives for flat-edge and top polishing. The twist-and-remove attachment allows for fast changing between six turbo pads with grits from 60 to 3000; the system also includes a 2” cup wheel for making back-bevel cuts with the company’s Seam Phantom®.
Contact: NSI Solutions, 425-297-3162

CNC PRODUCTION CENTER
Achilli s.r.l. Rimini, Italy, introduces the MAC 2500 CNC production center for stone, with a production area of 250cm X 120cm and a 50cm X-axis stroke. The machine includes user-friendly, new-generation W-CAM software, brushless motors on all axes, and automatic tool changing with a 20-tool cassette. Options include a 12.5 HP or 20 HP spindle, 90° or 30° angular gear, lathe (maximum column width of 400mm) and 2D/3D laser scan-tracing system.
Contact: Achilli s.r.l., +39-0541-387066

JOINT-SEAM CUTTER
Alpha Professional Tools®, Oakland, N.J., introduces the Alpha Groove Cutter for joint seaming. The patented design ensures grooves will be level to achieve maximum strength at each joint; the cutter works with popular high-speed angle grinders. Three sizes are available: two for cutting 3/4”- or 1 1/4”-thick granite, and one for 3/4” marble. All are for wet cutting only.
Contact: Alpha Professional Tools, 800-648-7229

SAW
VIC International, Knoxville, Tenn.., introduces the Renegade saw, offering 11’4” X 11’4” production and a unique table-locking device allowing very positive cuts at various degrees. The value-priced, U.S.-made unit operates on 220V three-phase or 220V single-phase; a hydraulic tilting table can be purchased separately.  
Contact: VIC International, 800-423-1634

INSTALLATION, RENOVATION, RENEWAL

SEAM SETTER
Omni Cubed Inc., Placerville, Calif., offers the Seam Setter VCA for joining and level seams, along with stabilizing backsplashes. Thumb-pump plungers allow no-tool conversion on the job to manual seam setters (without tools) when no AC power is available. (Pumps can also be powered with a 9V battery. The set includes two seam setters, carrying/storage case, vacuum pump, AC adapter, 9V battery adapter, four thumb pump plungers, and four cup covers.
Contact: OmniCubed, 877-311-1976

2D TEMPLATER
Prodim USA, Kennesaw, Ga., introduces the Proliner® 4, a 2D template measurer from Prodim International NV of Helmond, The Netherlands. The unit offers a 5 meter working area, with accuracy of 1mm; it can be connected directly with most CAD systems for use with any CNC production center. Optional accessories include a tripod, backpack and flight case for transport.
Contact: Prodim USA, 888-229-3328

SCRATCH REPAIR
Bonstone Materials Corp., Mukwonago, Wis., introduces its Scratch Repair Kit for polished countertops and floors. The kit takes on chips, cracks and surface scratches with fast-setting materials, including CA Glue Super Thin, CA Glue Gel, CA Spray Activator, Marble Polish, Hydro Seal 300 and black, gray and white powdered tints.
Contact: Bonstone Materials Corp., 800-425-2214

RODDING BOND
Akemi GmbH, Nuremberg, Germany, introduces MS76 Rodding Bond for adhering metal and plastic reinforcement of countertops. The cartridge-loaded solution is suitable for unloaded groove bonding up to a temperature of 100° C, with a short hardening time of 20-40 minutes. The North American representative is InnoChem LLC of Doraville, Ga.
Contact: InnoChem LLC, 800-316-3857

GREEN FORMULATIONS
Tenax S.p.A., Volargne, Italy, offers environmentally responsible products through its ThinkGreen project. The program includes water-based enhancers, water/oil repellant treatments and waxes; reduced volatile organic compound (VOC) emissions in products; and renewable-source components, such as natural extracts, in the production of mastics, epoxy resins, hardeners and abrasives. The North American office is Tenax U.S.A. in Charlotte, N.C.
Contact: Tenax U.S.A., 704-583-1173